Reactors: We manufacture Iron Core & Air Core Reactors as per IS 5553.
Application: Used with harmonic filter duty power capacitors to mitigate Harmonics, improve power factor and avoid electrical network.
Design and construction: Reactors are designed for 20% overload continuously And which will not saturate at 150% of rated current. They are designed for continuous Operation in an ambient temp 60° C with natural air cooling. Temp. Class as 'F'. Reactors are fitting with thermal overload protector in one coll.
- Core is made out of best stamping with very low core loss.
- Coll are made with SE/DFG Copper Strip Class 'F'.
- Interlayer insulation by Nomex paper.
- Inductors are vacuum impregnated with F class varnish
followed by over pressure (VPI). - Frame parts Zinc Plated.
- Termination on nickel plated studs.
- Tie rods are provided for mechanical strength and avoid
vibration / noise.
| Standards | IEC 60289/VDE 0532/En61558/IS 5553 |
|---|---|
| Rated Voltage and Frequency | Un = 440V, 50 Hz |
| Series Resonance Frequency | 210Hz (5.67%), 189Hz (7%) and 134Hz (14%) |
| Duty Cycle (Irms) | 100% |
| Class of Protection | IPOO |
| Ambient Temperature | 50° C |
| Temperature Class | Class 'F' |
| Protection | T.O.P. |
